ebay used coupe 1/4 window blackouts

Buy, sell or post an ad you've seen about ascMcLaren cars or parts.
Post Reply
User avatar
negusm
Site Admin
Posts: 5105
Joined: Wed Aug 25, 2004 6:11 pm
Location: Charlotte, NC
Contact:

ebay used coupe 1/4 window blackouts

Post by negusm »

1985 ascMcLaren Coupe - Midnight Blue
Under Restoration
User avatar
Sandy
Posts: 5965
Joined: Thu Aug 26, 2004 5:13 am
Location: Northern New Jersey GSP Exit 148
Contact:

Post by Sandy »

Buyer will be instructed to forward both plexiglass wincdows and weather striping to Mike Negus for installation :P
Sandy passed away in 2012. He will be forever missed.

1990 Final Car prior to the 12 Silver Anny Editions
1990 Silver Pearl Anny Edition
1986 Coupe Full Pkg #109 of 114.

http://public.fotki.com/ascmclaren/ascm ... _mclarens/
User avatar
negusm
Site Admin
Posts: 5105
Joined: Wed Aug 25, 2004 6:11 pm
Location: Charlotte, NC
Contact:

Post by negusm »

With the right weatherstripping, its a no brainer. That stuff Hank sent me was a PITA.

Besides, that stuff he has in the auction is probably so old that you woul d need new stuff anyways....and Hank says he has the right stuff now.

BTW, anybody know if they have weatherstripping going up the front vertical edge? I didn't put any there but may do it since the front edge has a bit a a gap.

-Mike
1985 ascMcLaren Coupe - Midnight Blue
Under Restoration
User avatar
Sandy
Posts: 5965
Joined: Thu Aug 26, 2004 5:13 am
Location: Northern New Jersey GSP Exit 148
Contact:

Post by Sandy »

Mike, as you might recall, I took the vertical aluminum finishing moulding off - just once to try and re-set and/or adjust it. I vividly recall that there was nothing under it.
Sandy passed away in 2012. He will be forever missed.

1990 Final Car prior to the 12 Silver Anny Editions
1990 Silver Pearl Anny Edition
1986 Coupe Full Pkg #109 of 114.

http://public.fotki.com/ascmclaren/ascm ... _mclarens/
User avatar
negusm
Site Admin
Posts: 5105
Joined: Wed Aug 25, 2004 6:11 pm
Location: Charlotte, NC
Contact:

Post by negusm »

Sandy wrote:Mike, as you might recall, I took the vertical aluminum finishing moulding off - just once to try and re-set and/or adjust it. I vividly recall that there was nothing under it.
Yeah your pics of your car didn't have it either. The plexiglass window bows out just a bit and the center touches the edge of that "vertical aluminum finishing moulding". Which towards the edges, at the top and bottom, there is a bit of a gap. It's not noticeable unless you know its there...
1985 ascMcLaren Coupe - Midnight Blue
Under Restoration
User avatar
eric5oh
Posts: 203
Joined: Sat Nov 06, 2004 8:33 pm
Location: Saint John, Indiana
Contact:

Post by eric5oh »

Mike, on the next set, I'll take the pieces for the sail panels and you can have the quarter windows, deal?
2018 F150 S'crew
2011 Fusion AWD
User avatar
negusm
Site Admin
Posts: 5105
Joined: Wed Aug 25, 2004 6:11 pm
Location: Charlotte, NC
Contact:

Post by negusm »

eric5oh wrote:Mike, on the next set, I'll take the pieces for the sail panels and you can have the quarter windows, deal?
Heheh. I really only can use one piece (the vertical strip for the driver's side). I have everything else....so I'm not too motivated to pick more up unless its going for really really cheap. That last set Hank was selling almost looked like it might go for $75!...I did put a bid at like $125 but it shot up passed me while I was hitting the button!

-Mike
1985 ascMcLaren Coupe - Midnight Blue
Under Restoration
Post Reply